How Is Wood Pressure Treated

How Is Wood Pressure Treated. The end tag should identify the. The dry wood is loaded into a treatment cylinder which is then sealed and depressurized to vacuum as much air as possible from the wood cells.

Severe Weather 2 Pressure Treated Lumber 4 x 6 x
Severe Weather 2 Pressure Treated Lumber 4 x 6 x from www.lowes.com

The video below shows you how it's made! Once the lumber is properly secured in the retort, a vacuum removes the air from the cylinder and from the cell structure of the lumber. The dry wood is loaded into a treatment cylinder which is then sealed and depressurized to vacuum as much air as possible from the wood cells.

Once The Lumber Is Properly Secured In The Retort, A Vacuum Removes The Air From The Cylinder And From The Cell Structure Of The Lumber.

After the wood is loaded, the cylinders will be sealed and any air inside the cylinder will be removed by vacuum using an industrial vacuum pump. The chamber is then flooded with a diluted chemical solution, and hydraulic pressure applied for 20 to 60 minutes to force the solution deeper into the wood. The end tag should identify the.

The Chamber Is Then Closed And Locked Airtight.

If the surface has been previously painted, you will want to do this step. How is pressure treated lumber made? How is pressure treated wood made?

The Process Is Fairly Simple, Vacuum Pressure Is Applied To Lumber And Once The Moisture And Air Is Removed, Chemicals Are Applied, Which Get Into The Wood Due To The Pressure Build Up.

Right thickness of the wood before starting this process, we make several bundles of timber.